RME ADI-2 DAC FS

De RME ADI-2 DAC FS is een voor hifi en thuisgebruik geoptimaliseerde versie van de ADI-2 Pro studio AD/DA Converter. Met DAC technologie die ontwikkeld is voor de Pro-versie met een goede en naar wens krachtige Extreme Power hoofdtelefoon-uitgang en een zeer stille IEM-uitgang. De RME ADI-2 FS klinkt precies en neutraal, zoals je van Pro-apparatuur verwacht, maar met verrassend veel klank. Gemak dient de mens, dus mét de nieuwe MRC afstandsbediening en de AutoDark functie zorgt er naar wens voor dat het LED-display 10 seconden na de laatste handeling uitgaat. De ADI-2 DAC FS is als eerste RME uitgerust met SteadyClock FS voor een precieze en jitter-vrije DA-omzetting.

1.199,00

Op voorraad

Beschrijving

SPECS

ADI-2 DAC FS

 

DIGITAL INPUTS

General

  • Lock Range: 28 kHz – 200 kHz
  • Jitter suppression: > 50 dB (2.4 kHz)
  • Jitter when synced to input signal: < 1 ns
  • Accepts Consumer and Professional format

SPDIF coaxial

  • 1 x RCA, according to IEC 60958
  • High-sensitivity input stage (< 0.3 Vpp)
  • AES/EBU compatible (AES3-1992)

SPDIF optical

  • 1 x optical, according to IEC 60958
  • ADAT compatible

ANALOG OUTPUTS

XLR

  • Output level switchable +19 dBu, +13 dBu, +7 dBu, +1 dBu @ 0 dBFS
  • Signal-to-noise ratio (SNR) @ +7/+13/+19 dBu: 120 dB RMS unweighted, 123 dBA
  • Signal-to-noise ratio (SNR) @ +1 dBu: 117 dB RMS unweighted, 120 dBA
  • Frequency response @ 44.1 kHz, -0.1 dB: 0 Hz – 20.2 kHz
  • Frequency response @ 96 kHz, -0.5 dB: 0 Hz – 44.9 kHz
  • Frequency response @ 192 kHz, -1 dB: 0 Hz – 88 kHz
  • Frequency response @ 384 kHz, -1 dB: 0 Hz – 115 kHz
  • Frequency response @ 768 kHz, -3 dB: 0 Hz – 109 kHz
  • THD @ 0 dBFS: < -120 dB, 0.0001 %
  • THD+N @ 0 dBFS: -116 dB, 0.00016 %
  • Channel separation: > 120 dB
  • Output impedance: 200 Ohm

RCA

As output XLR, but:

  • Output: 6.3 mm TS jack, unbalanced
  • Output level 6 dB lower than XLR (-5 dBu to +13 dBu @ 0 dBFS)
  • Signal-to-noise ratio (SNR) @ +13 dBu: 120 dB RMS unweighted, 123 dBA
  • Signal-to-noise ratio (SNR) @ +1/+7 dBu: 116/119 dB RMS unw., 119/122 dBA
  • Signal-to-noise ratio (SNR) @ -5 dBu: 112 dB RMS unweighted, 114 dBA
  • Output impedance: 100 Ohm

Phones

As RCA, but:

  • Output: 6.3 mm TRS jack, unbalanced, stereo
  • Output impedance: 0.1 Ohm
  • Signal-to-noise ratio (SNR) @ +22 dBu: 120 dB RMS unweighted, 123 dBA
  • Signal-to-noise ratio (SNR) @ +7 dBu: 118 dB RMS unweighted, 121 dBA
  • Output level at 0 dBFS, High Power, load 100 Ohm or up: +22 dBu (10 V)
  • Output level at 0 dBFS, Low Power, load 8 Ohm or up: +7 dBu (1.73 V)
  • THD @ +18 dBu, 32 ohm load, 1.2 watts: -120 dB, 0.0001 %
  • THD+N @ + 18 dBu, 32 Ohm Load: -114 dB, 0.0002 %
  • THD @ +14 dBu, 16 Ohm load, 0.94 Watt: -110 dB, 0.0003 %
  • Max power @ 0.001% THD: 1.5 W per channel

IEM

As Phones, but:

  • Output level at 0 dBFS: -3 dBu, 0.55 V
  • Signal-to-noise ratio (SNR) @ -3 dBu: 118 dB RMS unweighted, 121 dBA
  • Max power, 8 Ohm, 0.001% THD: 40 mW per channel

DIGITAL

  • Clocks: Internal, SPDIF In
  • Jitter suppression of external clocks: > 50 dB (2.4 kHz)
  • Effective clock jitter influence on DA conversion: near zero
  • PLL ensures zero dropout, even at more than 100 ns jitter
  • Additional Digital Bitclock PLL for trouble-free varispeed ADAT operation
  • Supported sample rates for external clocks: 28 kHz up to 200 kHz
  • Internally supported sample rates: 44.1 kHz up to 768 kHz

GENERAL

  • Included power supply: external switching PSU, 100 – 240 V AC, 2 A, 24 Watts
  • Standby power consumption: 120 mW (10 mA)
  • Idle power consumption: 7 Watts, Max. power consumption: 18 Watts
  • Idle current at 12 V: 570 mA (6.8 Watts)
  • Dimensions (WxHxD): 215 x 52 x 150 mm (8.5″ x 2.05″ x 5.9″)
  • Weight: 1.0 kg ( 2.2 lbs)
  • Temperature range: +5° up to +50° Celsius (41° F up to 122°F)
  • Relative humidity: < 75%, non condensing